Manualshelf

Full Product Manual

ManualsBrandsSecurityMan ManualsElectricalMobile App Based Wireless Home Security Alarm System with 12 Sensors for Home and Office
31323334353637383940
25
5. “Press and Release” the pair button on the back of the camera. At this point the green power LED
located on the front of the camera will start to flash rapidly indicating that it is in pair mode. When you see the
LED flashing rapidly press next on the Smartphone prompt. Input the Wi-Fi password of the network that you
are currently connected too and press next. This will allow the app to smart configure the camera using your
current wireless network.
6. Once your camera has been detected by the host the green power LED on the camera should start to flash
steady. Now input the default camera password 123456 when prompted, tap save and then tap ok on the
successfully registered prompt to complete the process.