Installation Guide

4
Product Basics
HARDWARE SETUP
Screw in the cameras antenna and insert your Micro SD memory card (not included) into the tf
slot. Then insert the female end of the cameras AC adapter into the DC in port located behind
the camera and the other end into a wall outlet closest to you. You can re-position the camera to
a different location once it has been successfully added to the app.
NOTE: The camera will perform a gear calibration self test every time it is powered on. This
test consists of several up, down, left and right rotations. DO NOT pan or tilt the camera with
your hands.
Antenna
Night Vision LED’s
Power LED
Microphone
Mounting Socket
Ethernet Port
Light Sensor
Pair Button Micro SD Slot
DC In
Reset Button
Speaker