Installation Guide

SMART CONFIG

Please refer to the “adding the camera to the app (SMART CONFIG Method)” section at the

start of this user’s manual. Adding camera using SMART CONFIG method do not required

Ethernet connection.

BROADCAST IN LAN

The Broadcast in LAN option performs a search for cameras currently connected to your

network.

NOTE: If SMART CONFIG method is already setup, BROADCAST IN LAN may be used as an

alternative setup for secondary Smartphone device and so on.

To add a camera to the app using the Broadest in LAN option, make sure the camera is

powered on and the included Ethernet cable is connected to your router. When you are ready,

launch the app and tap on the + (add) symbol located to the bottom left corner of the screen to

begin adding the new camera.

Tap on the Search in LAN option, and select the Broadcast in LAN option. When selected,

wait for the app to populate a list of Device ID’s (DID) that it found on your network.