Installation guide
Table Of Contents
- 1 Introduction
- 2 Architectural Overview
- 3 First-Time NT500 Offline System Installation & Setup
- System requirements
- Navigating the software
- Installing the system
- Defining the system
- Setting up organization options
- Creating time and mode profiles
- Setting up hardware
- Creating cardholders and operators
- Configuring a lock using a laptop
- Configuring an office admin kit as an enrollment station
- Viewing events, diagnostic information, and reports
- Database backup and restoration
- Glossary of Terms
Chapter 3: First-Time NT500 Offline System Installation & Setup
3 – 36
Notes Selecting 'None' allows access to the selected areas at all
times.
4 Click the checkboxes next to the time profiles to specify
the areas the time profile applies to.
5 If required, repeat for Profile 2.
To assign cardholder access group details
1 Select the Access Groups tab.
2 Select the access group(s) that cardholder belongs to.
3 Select Add on the Property Page.
To update a cardholder
1 Select a cardholder.
2 Select each tab in turn and enter appropriate information.
3 Click Update to save changes.
To delete a cardholder
1 Select a cardholder.
2 Select Delete.
3 Select OK to confirm.
The cardholder icon no longer appears in the window.