Installation guide
Table Of Contents
- 1 Introduction
- 2 Architectural Overview
- 3 First-Time NT500 Offline System Installation & Setup
- System requirements
- Navigating the software
- Installing the system
- Defining the system
- Setting up organization options
- Creating time and mode profiles
- Setting up hardware
- Creating cardholders and operators
- Configuring a lock using a laptop
- Configuring an office admin kit as an enrollment station
- Viewing events, diagnostic information, and reports
- Database backup and restoration
- Glossary of Terms
Chapter 3: First-Time NT500 Offline System Installation & Setup
3 – 25
Notes
Note: Mode options can be specified to require two-card
access. In these instances, two cardholders must present
cards to the reader in order to gain access.
To update a reader mode profile
1 Select an existing reader mode profile.
The Reader Mode window appears.
2 Edit the desired fields.
3 Click Update.
To delete a reader mode profile
1 Select an existing reader mode profile.
The Reader Mode window appears.
2 Click Delete.
3 Click OK to confirm.
The icon for the reader mode profile you deleted is no
longer displayed in the window.
Figure 3.15 Creating a reader mode profile