Installation guide
Table Of Contents
- 1 Introduction
- 2 Architectural Overview
- 3 First-Time NT500 Offline System Installation & Setup
- System requirements
- Navigating the software
- Installing the system
- Defining the system
- Setting up organization options
- Creating time and mode profiles
- Setting up hardware
- Creating cardholders and operators
- Configuring a lock using a laptop
- Configuring an office admin kit as an enrollment station
- Viewing events, diagnostic information, and reports
- Database backup and restoration
- Glossary of Terms
Chapter 3: First-Time NT500 Offline System Installation & Setup
3 – 20
Notes 8 Click Add.
9 Repeat steps 5 through 8 for additional holidays to be
included in this profile.
10 Click Update when all additional holidays to be included in
the profile have been defined.
To apply a holiday profile to an existing time profile
1 Select an existing time profile.
The Time Profile window appears.
2 Select the Holiday tab.
A list of available holiday profiles appears on the left side
of the window.
3 Click the box next to the holiday(s) you want to apply to
the time profile.
A check mark appears next to holiday profiles you select
and will be applied to the time profile.
4 Click Update.
Figure 3.13 Applying a holiday profile