Installation guide
Table Of Contents
- 1 Introduction
- 2 Architectural Overview
- 3 First-Time NT500 Offline System Installation & Setup
- System requirements
- Navigating the software
- Installing the system
- Defining the system
- Setting up organization options
- Creating time and mode profiles
- Setting up hardware
- Creating cardholders and operators
- Configuring a lock using a laptop
- Configuring an office admin kit as an enrollment station
- Viewing events, diagnostic information, and reports
- Database backup and restoration
- Glossary of Terms
Chapter 3: First-Time NT500 Offline System Installation & Setup
3 – 18
Notes 6 The hours of access defined by this time profile can be
selected by clicking in the white field next to each
weekday label. Then, while holding down the left mouse
button, highlight the range of desired times.
7Click Add.
A new time profile icon appears at the top of the screen.
To update a time profile
1 Select an existing time profile.
The Time Profile window appears.
2 On the Week tab, edit the desired fields.
3 Click Update to save your changes.
To delete a time profile
1 Select an existing time profile.
2 Click Delete.
3 Click OK to confirm.
The icon for the time profile you deleted is no longer
displayed in the window.
Once time profiles have been created they may be applied to
cardholders or access groups.
Figure 3.11 Creating a time profile