Use and Care Manual

29
• • Adding Cameras
To add a camera to your system simply highlight any of the
available cameras/channels (unlocked) and press the OK button
on the LCDDVR. Once selected, a confirmation screen will pop up
asking you to confirm (YES) or cancel (NO) your selection, use
the LEFT and RIGHT buttons to make your selection and press
the OK button to confirm. During the registration process a pop
up window showing “Add/Remove Camera” will be displayed for
approximately 10 seconds.
NOTE: When adding a camera, press the OK button on the
LCDDVR to confirm the adding camera selection and then
immediately press the “Pairing” button located on the back of the
camera 3 consecutive times (press, release, press, release, and
press and release). There is a 10 second grace period for adding
cameras, if pairing is unsuccessful before the 10 second grace
period has expired, then a pop up displaying “operation failed”
will appear. Pairing must be done within 20 ft from the LCDDVR.