Use and Care Manual

16
• In Single Channel Full Screen Display you can use the Camera button
on the LCDDVR to toggle through all four cameras in single channel full
screen display and then press the Record button to start recording when
the desired camera is being displayed on the screen.
NOTE: Recording in single camera independently will lock the LCDDVR
to that channel preventing it from being able to toggle to any other
available cameras.
Camera button
The Camera button is used to toggle back and forth between each
camera in full screen display. In Quad mode, press the Camera button
to start and stop recording by highlighting the camera and pressing the
Record button.
Quad Screen button
Pressing the Quad Screen button will toggle between single channel full
screen display and a split screen of all the cameras on your system.
Menu button
Press the Menu button to access the LCDDVR setup menu. The Menu
consists of system Settings, Playback/SD Card, Camera, and Exit. See
detail Menu Setup operation below.
Exit button
Press the Exit button at any time to exit out of the menu. The Exit button
plays no role in live display screen.
UP, DOWN, LEFT, RIGHT buttons
Use the Up (increase) and Down (decrease) buttons on the LDCCVR at
any time during live view to adjust the volume level. TheLEFT and RIGHT
buttons plays no role in live display screen.