DigiminiAir User’s Manual Digital Wireless Mini Indoor Camera Kit with Audio
© Copyright 2012 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty Disclaimers SecurityMan Inc, makes no other warranties, express, implied or otherwise, regarding this product, and specifically disclaims any warranty for merchantability or fitness for a particular purpose. The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may not apply to you. This warranty provides you with specific legal rights. There may be other rights that you have which vary from state to state.
Table of Contents Introduction 4 Important 4 Operating Restrictions 4 Conditions 6 Safety Instructions 7 Features 8 Package Contents 9 Product Basics 10 Quick Start 11 Camera Installation (SM-209DT) On-Screen Display 11 14 Signal Strength 14 Channel 14 No Signal 14 Operation 15 Adding and Pairing Camera to the Receiver 15 Switching between Channels/Cameras 15 Specifications 16 Troubleshooting 17 3
Introduction Thank you for purchasing SecurityMan DigiminiAir. The DigiminiAir is a “Do-It-Yourself” Digital Wireless Security camera kit designed for easy installation and operation. With surveillance made easy, this DIY kit will allow you to monitor your home, business, front or back doors, garage, backyard, or any location that you would like to keep an eye on.
• DO NOT place this product too close to medical equipments. Radio waves might potentially cause breakdown of electrical medical equipment. This product should be placed at least one foot away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance. • DO NOT use this product to violate one’s privacy. Monitoring one’s private activities without consent is illegal and this product is not designed and manufactured for these purposes.
• DO NOT put the camera in quaky paces. The camera may be unstable or out of operation if installed improperly. Such installation may also cause breakdown. • DO NOT touch, shake or hold the antenna. Touching, shaking or holing the antenna might influence the receiving of electromagnetic wave, and thereby influence the receiving effect. • DO NOT use the camera in complex environment, the obstruction of stumbling block will affect the electromagnetic wave and influence the receiving range.
• Avoid putting the product in places where temperature or humidity may change rapidly in temperature or humidity. • Keep it dry, dustless and avoid exposure directly in sunlight. • Keep product away from heat sources such as electric heater. • It might influence the normal operation of the product if used at the fringe range of normal temperature. Please turn off the power when not in use. • Please obey the local government’s environment protection policy.
parts is forbidden. The manufacturer will not be responsible for any loss arising from such actions. • Do not put the device into fire, oven or microwave oven, in order to avoid explosion. • As a result of version changes, the user manual may be different from the actual product. Please take the actual product as the standard. Features • Do-it-yourself (D.I.Y) easy to setup and use wireless camera kit • Mini size camera design.
Package Contents 1 x Receiver (SM-451DR) 1 x Camera (SM-209DT) 1 x AV Cable 2 x AC Adapters 4 x Screws User’s Manual 9
Product Basics Antenna Camera (SM-209DT) Lens Microphone Mounting Bracket Power Jack Pairing Button Receiver (SM-451DR) Antenna Channel Button Pairing Button Audio Output LED Lights Video Output Power Socket Docking Stand 10
Quick Start Please follow steps 2~5 below and test both the camera and the receiver first prior to installing the camera in the desired location. Do a simple test to make sure the camera and the receiver are both working and that the receiver are able to pick up the camera image. Camera Installation (SM-209DT) 1. Mounting the camera: a) Detach the cameras mounting bracket by removing the two screws located on the left and right side of the camera using a Philip screw driver.
c) Re-attach the camera to the mounting bracket and adjust the viewing angle as needed (adjust by tilting up and down) as illustrated below. 2. Connect the power adapter plug into the power socket attached to the camera and then connect the power adapter (5VDC, 1.5A) into an electrical power outlet as shown below.
3. Plug the receiver power supply (5VDC, 1.5A) to the receiver’s DC IN port and the other end to an electrical power outlet. Next, connect the AV cable out from the receiver to your TV/monitor or recording devices (VCR or DVR) AV input. Note: To power on the receiver, simply plug in the power supply, the receiver do not have power ON/OFF switch.
NOTE: Pairing must be done within 20ft. On-Screen Display Signal Strength Channel No Signal Signal Strength The signal bars on the on-screen display indicates the signal strength between the camera and the receiver.
or recorded. You can toggle between channels by simply pressing the “CH” button located on the receiver. No Signal A “NO SIGNAL” notification will be displayed (followed by a melody) whenever the user toggles to a channel with no camera matched to it or if the camera and receiver are not successfully matched. NOTE: The “Channel” and “Signal Strength” icons will turn orange during the no signal warning.
Specifications SM-209DT (Camera) SM-451DR (Receiver) Wireless Image Sensor Resolution View Angle Audio Minimum Illumination Pairing Button Power Supply Dimensions Channel Button Pairing Button AV Output Power Supply Dimensions (LxWxH) Stand Frequency Transmission power Receiver Sensitivity Modulation Antenna Transmission Distance Operating Temperature Operating Humidity 1/4” CMOS Color 510 x 492 pixels (NTSC) 60 degree Microphone built-in (up to 30ft) 3 Lux/F1.2 1 DC 5V / 1.5A 1.45” x 1.45” x0.
Troubleshooting Q: There is no picture from a camera? Check all connections to the camera and the receiver. Make sure that the camera and receiver are both ON and that the camera(s) is in range of the Receiver. Q: The image from the camera(s) is choppy and/or keeps cutting out? The wireless receiver may be out of range of the camera(s). Use the signal bars on the on-screen display to observe signal strength. 0~1 bars = no/ weak reception; 4 bars = strong reception.
