SDS

11 853535P-1050mAh Size picture
L
W
b bd
c
a
T
Al Tab Ni Tab
4.1 the dimensions
Thickness: 8.7 mm or less (when the measurement instrument of pressure acting on the battery is 300 gf, temperature of 25
+ 2 ℃)
Width: 35.0 + / - 0.5 mm
Length: 36.0 + / - 1.5 mm
Note: the battery storage or use inflation happens at high temperature.
4.2 appearance
Cell surface clean, no electrolyte leakage, no obvious scratches and mechanical damage, no deformation, no other cosmetic
defects affect the value of a battery.
5 performance
5.1 standard test conditions
Test the battery must be our company delivery time not more than a month of the new battery, and battery has not been more
than five times the charge and discharge cycle.Unless other special requirements, the provisions of this product specification of
test condition is: temperature of 25 + 2 ℃, relative humidity 45% ~ 85%.If have proved that the test result is not affected by
these test conditions, the experiment is also available in 15 ~ 30 ℃ temperature, relative humidity 25% ~ 85% under the
conditions of.
Shenzhen Suyu Technology Co.,Ltd
853535P-1050mAh Specification