Full Product Manual

20
3. Now select Motion Detection from the available options and select
the desired sensitivity level for the camera being configured.
NOTE: When you are done, you can press the back arrow located to
the right of the Camera label to go back to the previous screen or you
can switch between cameras by tapping on the “<” & “>” icons to begin
configuring the next camera.
The LCDNDVR is equipped with two methods to take photo snapshots,
Manual and Motion Detection.
Before you can utilize the snapshot feature the DVR’s recording method
must be changed from “Video” to “Photograph”.
1. Tap the Menu icon on the receiver and then tap on the Settings icon.
• Photo Snapshots
Enabling Photo Snapshots