Full Product Manual

19
Motion Detection Recording
Motion Detection recording can be enabled / disabled on a “Per
Camera” base and is identified by a Walking Person icon located at the
top of each cameras live view screen. Motion detection can be activated
/ deactivated by following the steps below.
NOTE: Each motion detected recoding event is fixed at 2 minutes per
event, unless motion is continuously being detected.
1. Tap the Menu icon on the receiver and then tap on the Settings icon.
2. Tap on the Camera icon and select which camera you want to enable /
disable motion detection recording on.
NOTE:
You can switch between cameras by tapping on the “<” & “>”
icons.