CUcam2 Wireless Outdoor/Indoor Color Camera Kit with Night Vision/Audio
2010
900MHz 900MHz 900MHz
CUcam2 Features 20
Thank you for purchasing the CUcam2 900MHz 2 (SM-302TX) SM-202-900TX 2 (SM-302RX) and antenna SM-202-900RX 3 x 8VDC Power Adapters • 1 x manual Plectrum & Dry Wall Screws
• • • • • • • • • • • Do-it-yourself(D.I.Y.), easy to setup and use Perfect for monitoring around your home or business Wireless video direct to your TV or recorder High quality picture and sound transmitting and receiving No interference from crowded 2.4GHz devices Built-in IR LEDs for night vison (up to 23ft, B/W) Stronger wall penetration than 2.4GHz/5.
A/V Output (To Monitor/TV)
Away from the camera Toward the camera
The channel Mode Control are used to turn the camera(s) OFF or ON depending on the number of active camera in use. If the CH is set to the OFF position, the Manual Mode and the Channel Scan Mode will not take into affect.
is press. Note: To manually toggle between channels, it requires two active camera. every 5 seconds.
Specifications of Camera (SM-302TX) Image Sensor 1/4_CMOS Total Pixels 510(H)_492(V) Video Format NTSC Minimum Illumination 0 lux (IR on) Night Vision Range Up to 23ft Lens Internal, f=3.6mm fish eye lens Transmission Frequency 902~928MHz Channel Options 2 Channels Selection_906MHz/924MHz_ Modulation Type FM S/N 40dB(AGCOff) Transmission Power 2~30mW Audio Frequency Band 4.
Specifications of Receiver (SM-302RX) Transmission Frequency 902~928MHz Channel Options 2 Channels Selection_906MHz/924MHz_ Channel Selection and Control Three dip switches (Ch1/Ch2/auto-loop) Channel Indication 2 Green LED Frequency Stability ±100KHz Local Oscillator Leakage ≤-55dBm Receiving Sensitivity ≤-85dBm Differential Phase 10Deg. S/N 38dB Video Output Impedance 75ohm Video Output Voltage 1.0±0.2Vp-p(Standard value:1Vp-p) Audio Carrier 4.
