Installation Guide

ManualsBrandsSecurityMan ManualsElectricalWireless Wall Clock iSecurity Camera with MicroSD Recorder with Remote Viewing

CLOCKCAM-WIFI Quick Start Guide (iPhone)

The SecurityMan CLOCKCAM-WIFI is

designed for quick and easy

installation. This guide will help you

get your camera connected to your

mobile device in 3 easy steps.

Step 1 HARDWARE

Step 2 INSTALL APP & SCAN QR CODE

1 2

1. Open the App Store on your mobile device. Then search for and

install the “IPCam Live” application. Once installed, tap on the

“IPCam Live” icon (ﬁg. 2.1), select “By Device” (ﬁg. 2.2) and then

select the “Add” button (ﬁg. 2.3).

Fig2.1 Fig2.2

Fig2.6

Fig2.5Fig2.4

Fig2.3

2. Tap on the QR Code Icon (ﬁg. 2.4) and point your camera at the QR

Code located on the back of the clock (ﬁg 2.5). The serial number

(Serial ID) will be displayed once the QR Code is scanned. At this

point you may choose to rename your device under “Name” and then

press “Save” located on the upper right hand corner of the screen

(ﬁg. 2.6).

+AA

Insert Clock Battery

(not included)

Connect the

Power Adapter

Insert Micro SD Card

(not included)

Connect the Ethernet

Cable to your Router

Summary of content (4 pages)

PAGE 1
CLOCKCAM-WIFI Quick Start Guide (iPhone) The SecurityMan CLOCKCAM-WIFI is designed for quick and easy installation. This guide will help you get your camera connected to your mobile device in 3 easy steps. Step 1 HARDWARE Fig2.3 2. +AA Insert Clock Battery (not included) Tap on the QR Code Icon (fig. 2.4) and point your camera at the QR Code located on the back of the clock (fig 2.5). The serial number (Serial ID) will be displayed once the QR Code is scanned.
PAGE 2
3. Now select your device (fig. 2.7) to bring up the live view screen (fig 2.8). 2. Make sure both “Enable” & “DHCP” are enabled (switched to green) and click “Search” (fig. 3.4). Select the Wi-Fi name that is associated with your network by tapping on the name (fig.3.5). NOTE: The following images will appear stating “Connecting…” and “Buffering…” If successful, your cameras image will be displayed. Fig3.4 Fig2.8 Fig2.7 STEP 3 WI-FI SETUP 3.
PAGE 3
CLOCKCAM-WIFI Quick Start Guide (Android) The SecurityMan CLOCKCAM-WIFI is designed for quick and easy installation. This guide will help you get your camera connected to your mobile device in 3 easy steps. Step 1 HARDWARE Fig2.3 2. Tap on the QR Code Icon (fig. 2.4) and point your camera at the QR Code located on the back of the clock and press “Ok” once the image is captured (fig 2.5). The serial number (Serial ID) will be displayed once the QR Code is scanned.
PAGE 4
Fig3.4 Fig2.8 Fig2.7 3. STEP 3 WI-FI SETUP NOTE: STEP 2 must be complete before beginning STEP 3 Wi-Fi Setup. 1. Tap on the “Home” icon located on the upper right hand corner of the screen (fig. 2.8). Select “Device Setting” (fig. 3.1). Select your device (fig. 3.2). Select “Wi-Fi” (fig. 3.3). Fig3.5 Once your Wi-Fi name has been selected, type in the password associated with your Wi-Fi network (fig. 3.6).