Full Product Manual

83
• • • •VIDEO BLIND
The VIDEO BLIND sub-menu located in the “Alarm” menu option consists of
13 settings that are used to configure how the IP camera will respond when
the its lens has become obstructed (blind). These settings are:
A. Channel – used to select which camera you want to configure.
B. Enable – enables/disables motion detection alerts.
C. Sensitivity (drop down) – used to adjust the motion detection
sensitivity level.
D. Schedule – used to setup a recording schedule.
E. Action Area – used to control what the IP camera should do when
an event occurs.
F. PTZ Activation – enables motion activated tour and preset movement.
G. Notification Area – used to select how you want to be notified when
an event occurs.
H. Delay – post-Record time frame.
I. Copy – copies the current configuration settings.
J. Paste – pastes the configuration settings to the selected camera.
K. Refresh – restores any changes made.
L. OK – saves the changes.
M. Cancel – exits the menu without saving the changes.
I J K L M
H
A
B
C
D
E
F
G