SecurityMan ® ClearCam II Wi-Fi Interference Free Wireless Outdoor/Indoor Color Camera Kit with Night Vision/Audio User Guide
Copyright Notice This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including translation to another language or format, without the prior written permission of SecurityMan.
Warranty SecurityMan warrants that this product will be free from defects in materials and workmanship for period of time specified on the product packaging. This limited warranty shall commence from the date of purchase. SecurityMan Products warranty is not transferable and is limited to the original purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer's only obligation, SecurityMan will repair or replace the product .
Notice: 0.9GHz wireless camera works at ISM band. It may cause interferences with other wireless equipment that operates at the same band. Please turn off one of the equipment to eliminate the interference. Product Assurance 0.9GHz wireless camera will emit electromagnetic wave, just like other wireless products. But the output power of the products is lesser than other wireless products such as mobile phones. The0.
Conditions Please read the following messages to make sure whether your working environment is suitable. • Ensure there is enough space around the receiver for ventilation. • The temperature should be kept between –10˚C and 50˚C (-14˚F – 122˚F). The relative humidity should remain from 20% to 80%.
Warning: • In order to avoid inflammation or electric shock, this machine should be kept away from exposure to rain or moist, and it shall not be put in or near bathrooms, washing pools, washhouses, moist basements, or swimming pools. • In use of sockets set on walls or extension wires, attention should be paid not to exceed their load capabilities to avoid inflammation or electric shock; • Casings are not allowed to open, otherwise the internal precision parts may get damaged, or personal injury caused.
DO NOT put the package plastic bags in reach of children or babies. *It might cause asphyxia if children or babies putting the bags into their mouths. DO NOT plug the AC adapter into the outlet in improper situation. *Plugging AC adapter with wet hand might cause electric shock. Plugging AC adapter unsteadily might cause fire or electric shock. DO NOT cover the AC adapter when it is connected to power socket, place the adapter near heaters, and put it on the floor that is equipped with a heater.
DO NOT disassemble or repair the camera, the receiver and other relevant peripheral equipment. *Improper disassembly might cause damages to the product or the peripheral equipment. DO NOT use the receiver on the surface of thermo labile material. *Please embed thermal insulating material when using on the surface of the thermo labile material. DO NOT place or use the AC adapter on temperature sensitive materials. *The above practice might cause the plastic distortion, fading or sticking on the surface.
DO NOT let several cameras with same frequency work at the same time. *The overlap of the electromagnetic wave signal of the same frequency might cause severe interferences and unable to receive signals. Please adjust the brightness on TV or on monitor to achieve optimum efficiency. *There are slight differences of brightness among cameras which can be adjusted DO NOT use the camera in complex environment.
Contents Introduction Package Contents Technical Support 12 12 12 Product Basics Camera Receiver Dip-Switch(Camera) Receiver manual & loop switch 13 13 13 14 15 Installation Diagram 16 Installation A) Setting up the Antennas B) Setting up the Camera C) Setting up the Receiver for manual or loop mode D) Setting up the Receiver with TV/Monitor/VCR/DVR 16 17 17 18 Specification 19 Troubleshooting 20 11
Introduction Thank you for purchasing ClearCam II. ClearCam II is a convenient wireless security camera kit for any outdoor/indoor surveillance of a home or a business. It consists of a wireless camera, a receiver, and needed accessories. Note: Please read the manual entirely before using the product. Package contents: • 1 x Wireless outdoor/indoor color camera (SM-8123T) with bracket • 1 x 2-CH 0.
Product Basics Camera Dip-Switch 1 OG ON 2 GD H0 Antenna 2 Microphone Built-in Sunshade Infrared LEDs for night vision Bracket (with 2 adjustable viewing angle) Power Jack Receiver Antenna Power Socket LED channel Indicator DC8V MANUAL CH2 CH1 SET Channel Button (manual mode) LOOP Manual/Loop Switch A/V Audio/Video Output 13
Dip-Switch (Camera) To adjust the dip-switch channel for the camera, unscrew to remove the front portion of the camera.
Receiver manual & loop switch LED channel Indicator CH2 CH1 SET Channel Button(manual mode) A) In manual mode use the channel button "SET" to toggle between channel #1 & channel #2. B) In loop mode the receiver will auto dwell by switching between channel #1 & channel #2. The auto dwell time is fixed and preset to 5 second intervals. Sunshade A B For outdoor use, you should attach the sunshade to reduce sun reflection (A).
Installation Diagram VCR/DVR Or A / V Cable CH4 AC adapter CH2 CH1 SET WARNING: When using power adapter, make sure the voltage indications on the adapters are compatible to the devices to avoid potential damages for incorrect usage of power.
B) Setting up the Camera 1) 2) 3) 4) 5) Set the camera to desired Dip-Switch Channel Frequency Place the camera in a desired location. Plug the power adapter jack into the power jack Plug the power adapter to any AC/DC outlet Jot down the Dip-Switch Channel of each camera. (The receiver will receive signal from the corresponding camera and display one at the time. For example, Channel 1 light on the receiver will display the image from Camera 1 only).
D) Setting up the Receiver with TV/Monitor/VCR/DVR 1) 2) 3) Connect one end of the A/V cable to the A/V out jacks of the Receiver. Connect the other end to your TV/Monitor A/V jacks. Plug the Receiver’s Power Supply (8V DC Adapter) into any wall outlet and plug its jack into the Receiver.
RECEIVER(SM-7034) CAMERA(SM-8123T) Specification Item Imaging Senor Total Pixels Minimum illumination Transmission Frequency Transmission Power Modulation Type Bandwidth Power Supply Consumption Current Unobstructed Effective Range Night Vision Range Dimension(WxDxH) Weight Receiving Frequency Intermediate Frequency Demodulation Type Antenna Receiving Sensitivity Video Output Level Audio Output Level Power Supply Consumption Current Dimension(WxDxH) Weight Operating Temperature Operating Humidity Value
Troubleshooting Abnormal Phenomena Possible Reasons/Solutions *Check the camera / receiver is connected to the power supplies, and powered on. *Check the channel of the receiver to correspond with camera; *Check the distance and blocks. *Interfered by other sources; *Check the distance and blocks. *Mismatching system of PAL TV and NTSC cameras or vice versa.
www.securitymaninc.
