User manual

LOAD ROUTE
1. Transfer the route les from the reading data
management software to the memory stick.
2. Insert the memory stick into the USB port at the
bottom of the handheld.
3. From the ORION Field Application main menu,
tap Load/Unload.
Result: The Load screen displays the load les
(services) on the memory stick.
4. Tap the Memory Stick le on the Load screen to
begin the load process.
Result: A progress bar displays during the route
load process.
Figure 156: Tap to load route
When the load process is complete, the main menu
displays showing the Read Route option with the
number of services, and the Load/Unload option
with the date and time of the load.
5. Remove the memory stick from the handheld
USB port. The route is ready to be read.
Figure 157: Main menu after route is loaded
Unload Route
1. Insert the memory stick into the USB port at the
bottom of the handheld.
2. From the ORION Field Application main menu,
tap Load/Unload.
Result: The Unload screen displays the les (services)
ready to unload.
3. Tap the Memory Stick le on the Unload screen
to begin the unload process.
Result: The route les unload to the memory stick.
When the unload process is complete, the main
menu displays showing the Load/Unload option
with the date and time of the unload.
4. Remove the memory stick from the handheld
USB port. The unload les are ready for RDMS.
Figure 158: Tap to unload route
LOAD ROUTE
Page 93 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®