User manual

LOADING AND UNLOADING WITH MEMORY STICK
The Load/Unload option on the ORION Field Application main menu is used to load and unload route files on the handheld
using a memory stick.
OTE:N Route files can also be transferred using FTP with an Internet connection. For complete information, refer to the
Wireless Load and Unload User Manual, available at www.badgermeter.com.
Figure 154: Main menu: Load/Unload
Initialize Memory Stick
Before a memory stick is used to load/unload route files, it must be initialized by associating it with a handheld. This process
only needs to be done one time.
OTE:N If you need to change the handheld Device
Name, change the Device Name before you
initialize the memory stick.
1. Insert a blank memory stick into the USB port at
the bottom of the handheld.
Result: A message displays asking if you want to
associate the memory stick with the handheld.
2. Tap Ye s .
The LOAD and UNLOAD folders are created on the
memory stick during the initialization process.
Figure 155: Initialize memory stick
LOADING AND UNLOADING WITH MEMORY STICK
Page 92 October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®