User manual

4. Tap to select the Circle Shortcut button. You may
need to scroll to nd it.
5. Tap the Assign a program eld and select Scan
Agent. You may need to scroll to nd it.
Figure 134: Select Circle Shortcut
Figure 135: Select Scan Agent
Figure 136: Tap OK
6. Tap OK.
Result: The circle shortcut button on the handheld
keypad is now programmed to scan a barcode
when pressed.
OTE:N The scanner can be used to capture ORION
endpoint serial numbers. Due to the design,
the scanner will not read the barcode
imprinted on the endpoint cover but can
be used to read the barcode on the label
attached to the endpoint wire.
Figure 137: Press circle shortcut to scan
AVOID DIRECT VIEWING OF THE SCANNER LASER BEAM. DO NOT STARE INTO IT OR POINT DIRECTLY AT EYES.
TRIMBLE RANGER 3 HANDHELD OVERVIEW
Page 74 October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®