User manual

Change Port
OTE:N Adjustments to the COM ports should be made only with the assistance of Badger Meter Technical Support.
1. On the Hardware Options screen, tap to select the
hardware you want to change. Then tap
Change Port.
Result: The COM port selection screen opens. The title
bar shows the device you selected. In Figure 98, the
ORION CE Receiver was selected.
2. Tap to select the COM port from the list. The COM
port change is made automatically and displays on
the Hardware Options screen.
If you do not want to change the COM port, tap
Cancel to return to the Hardware Options screen.
3. Tap Back to return to the Settings screen.
Figure 98: Select type of device
Remove Device
Access Settings> Hardware Settings from the ORION Field Application main menu.
1. On the Hardware Options screen, tap to select a
device you want to remove. Then tap
Remove Device.
Result: A screen displays as shown in Figure 99, asking
for confirmation.
2. Tap Ye s to remove the device. Tap No to return to
the Hardware Options screen.
Result: The device is removed from the list on the
Hardware Options screen.
3. Tap Back to return to the Settings screen.
Figure 99: Remove device
SETTINGS
Page 52 October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®