User manual

Hardware Options
Figure 94: Settings: Hardware Options
Select Hardware Options from the Settings menu to view and change the communication (COM) ports for the handheld and
add or remove a device attached to the handheld.
Figure 95: Hardware Options screen
Hardware Options Defaults
The Hardware Options screen shows the following defaults, depending on the type of handheld.
• Technology connected to the nine-pin serial port uses COM 1. The default shows the IR Head.
• The built-in GPS on the handheld uses COM 2. GPS does not display if the handheld does not have internal GPS.
• The internal technology on the handheld uses COM 7.
Reset Defaults
To quickly reset the factory default settings after making changes to Hardware Options, press the CLEAR key and respond Yes
when asked if you want to return to the default Hardware Options settings.
SETTINGS
Page 50 October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®