User manual

Requesting Firmware Version Manually
Perform the following steps to manually initiate a request for the endpoint firmware version from an ORION Migratable (or
Fixed Network in mobile mode) endpoint.
1. Tap the Work Items button on the account read
screen for an ORION ME account.
Result: The Work Items screen opens.
OTE:N If a work item is set to be performed
automatically, the message says “Assigned”
and the Collect button is inactive.
Figure 42: Extended status
2. Tap to select Firmware Version. Then tap Collect.
Result: ”In Process“ displays next to the Firmware Version eld as data collection begins. See Figure 43.
”Complete“ displays when data collection is finished and the View button becomes active. See Figure 44.
Figure 43: In process
Figure 44: Complete
3. Tap View.
Result: The Firmware Version screen displays with the
endpoint rmware version of the selected account.
4. Tap Ok to return to the Work Items screen.
5. Tap Close to return to the account read screen.
Figure 45: Firmware version results
WORK ITEMS
Page 28 October 2014ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®