User manual

Requesting Extended Status Manually
Extended status is additional information programmed into an endpoint, including meter type and size, unit of measure and
encoder type, as well as exception statuses, such as tamper and no usage. Perform the following steps to manually initiate a
request for extended status from an ORION Migratable (or Fixed Network in mobile mode) endpoint.
1. Tap the Work Items button on the account read
screen for an ORION ME account.
Result: The Work Items screen opens.
OTE:N If a work item was set in RDMS to be
performed automatically, the message
says “Assigned” and the Collect button is
inactive.
2. Tap to select Extended Status. Then tap Collect.
Figure 38: Extended status
Result: “In Process” displays next to the Extended Status field as data collection begins. See Figure 39.
”Complete“ displays when data collection is finished and the View button becomes active. See Figure 40.
Figure 39: In process
Figure 40: Complete
3. Tap View.
Result: The Extended Status screen displays with the
details of the selected account.
4. Tap Close to return to the Work Items screen.
5. Tap Close to return to the account read screen.
Figure 41: Extended status details
WORK ITEMS
Page 27 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®