Owner`s manual

5
Carton Inventory
Your garage door opener is packaged in two cartons which contain the motor unit and all parts illustrated below.
Accessories will depend on the model purchased. If anything is missing, carefully check the packing material. Parts may
be stuck in the foam. Hardware for installation is also listed below.
INSTALLATION HARDWARE
Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Insulated Staples
Ring Fastener (3)
Drywall Anchors (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Rope
Handle
Multi-Function Door
Control Panel
SECURITY✚
®
3-Button Remote Control
Models 3280CM (1),
3280CM-267 (2)
Remote Control
Visor Clip
Belt Cap Retainer
SECURITY✚
®
Keyless Entry
Model 3280CM-267 ONLY
Motor Unit with 2 Light Lenses
Styrofoam
Belt
Door Bracket
Header Bracket
Curved Door
Arm Section
2-Conductor Bell Wire
White & White/Red
Belt Pulley Bracket
Trolley
One-Piece Rail
Safety Labels
and Literature
Straight Door
Arm Section
The Protector System
®
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Safety Reversing
Sensor Bracket (2)