User manual

8
The SHOT button calls the desired Preset Position.
HOME is for a Home Preset Position.
A and B are Preset Positions that can serve as Left and Right Limiting Positions
allowing the camera to automatically scan between the two positions.
The PRESET button is to set a preset point.
The DELETE button is to clear a preset point.
Each of these keys needs to be pressed and held for 3 seconds to achieve the
desired function.
Pressing AUTO puts the system into auto cruise mode.
Pressing SPEED sets the speed of the target camera’s movement. S1 through S4
are shortcut keys for speeds: S1 = 8, S2 = 40, S3 = 51, S4 = 63 with S1 the slowest
and S4 the fastest.
Pressing FOCUS + focuses the target camera far.
Pressing FOCUS – focuses the target camera near.
Pressing IRIS OPEN opens the target camera’s iris.
Pressing IRIS CLOSE closes the target camera’s iris.
Pressing ZOOM + zooms the target camera wide.
Pressing ZOOM - zooms the target camera near (telephoto).
Pressing PATTERN starts / stops pattern learning (Pattern Tour Setup)
Pressing RUN runs a Pattern Tour.