User manual

v2.0 11/8/11
51
Tour (Screen Sequencing) Settings
Each channel window can be displayed as a single window, one of four windows, one of nine
windows or one of sixteen windows. Further, by highlighting the ENABLE TOUR checkbox each
channel window can be sequenced according to a desired time interval.
From Main Menu click the System icon followed by the Tour icon. A Tour settings screen similar
to the one below will appear.
a. INTERVAL – Using the mouse cursor, left mouse button and soft keypads enter the
sequence interval timing. Range is 5 to 120 seconds.
b. VIEW – View 1 refers to single window display. Highlight the channel numbers for
channels to be displayed. View 4 refers to a quad display where 4 channel windows will be
displayed at one time. View 8 provides two quad displays of 4 channel windows per each
quad display. The user chooses which windows per quad display. View 9 allows for two
quad displays of widows per display with one large window. View 16 refers to all 16
channels displayed at once.