User manual

v2.0 11/8/11
49
h. MOBILE – The DVR can be configured to support smartphone access and management. .
Note a compatible remote client must be installed on the smartphone and a router must
direct the smartphone client to the mobile port. A Mobile configuration screen similar to the
one below will be displayed. Highlight the ENABLE checkbox
 PORT – Input the port number. Be sure to forward this port in the network router.
l. UPNP (Universal Plug and Play) – The DVR support the UPNP protocol to allow the DVR
to appear as a plug and play network device. UPNP must be running on the network
router before implementing it on the DVR. A UPNP configuration screen similar to the one
below will be displayed. Highlight the ENABLE checkbox.
 HTTP – The router will automatically distribute the HTTP port for the DVR when using
Internet Explorer for viewing.
 TCP – The router will automatically distribute the TCP port for the DVR when
monitoring using remote management software such as CMS.
 MOBILEPORT – The router will automatically distribute the Mobile Port for the DVR
when a smartphone is accessing and monitoring.