User manual

v2.0 11/8/11
41
a. DIRECT AUX OPER – From the drop-down menu select the auxiliary equipment
(e.g., a light) and click on ON or CLOSE to control.
b. AUX NUM OPER – The operation of the corresponding auxiliary switch according to
the PTZ agreement.
10. SYSTEM SETTINGS
The System Settings menu allows DVR configuration for date, time, encoding, network, network
servers, DVR GUI, PTZ cameras and monitor window sequencing. The System Settings menu is
accessed by going to Main Menu and clicking on the System icon. Upon doing so the System
Sub-menu will appear.
General Settings
Go to Main Menu, click on the System icon then the General icon. General settings include
system time and date, date format and separator, time format, language, hard drive full
management options, video format, etc. The General menu screen displayed is similar to the one
below.
a. SYSTEM TIME – Position the mouse cursor, click the left mouse button and use the soft
keyboard to enter date and time.
b. DST- If Daylight Savings Time needs to be incorporated as part of the DVR’s system time
click the DST button and a DST configuration screen will appear similar to the one below.