Installation manual

28
9.0 PATTERN SETUP
From the MAIN MENU, use the DOWN button to highlight
PATTERN SETUP and use the OPEN button to access the sub
menu.
The PATTERN SETUP menu page will display:
9.1 PATTERN TOUR
Use the UP & DOWN buttons to select PATTERN TOUR and use
the LEFT & RIGHT buttons to set it to either START or STOP.
When set to START, upon exiting the menu the camera will begin
its tour, according to the settings of PATTERN POINT NUM and
PATTERN DWELL TIME, #’s 9.2 and 9.3 below.
When set to STOP, the camera will stop running its tour when the
menu is exited.