User manual

v2.0 11/8/11
46
h. MOBILE MONITOR – The DVR can be configured to support smartphone access and
management. . Note a compatible remote client must be installed on the smartphone and
a router must direct the smartphone client to the mobile port. A Mobile configuration
screen similar to the one below will be displayed. Highlight the ENABLE checkbox
 PORT – Input the port number. Be sure to forward this port in the network router.
i. UPNP (Universal Plug and Play) – The DVR support the UPNP protocol to allow the
DVR to appear as a plug and play network device. UPNP must be running on the
network router before implementing it on the DVR. A UPNP configuration screen
similar to the one below will be displayed. Highlight the ENABLE checkbox.
 HTTP – The router will automatically distribute the HTTP port for the DVR when using
Internet Explorer for viewing.
 TCP – The router will automatically distribute the TCP port for the DVR when
monitoring using remote management software such as CMS.
 MOBILEPORT – The router will automatically distribute the Mobile Port for the DVR
when a smartphone is accessing and monitoring.