User manual

v2.0 11/8/11
35
f. To call a pattern, from the PTZ Control interface screen click the PAGE SWITCH button
once to display a page for calling presets, patterns, tours, and scans. The control page
displayed will be similar to the one below.
g. Using the left mouse button and soft keyboard enter the desired pattern number to be
called.
h. Click the PATTERN button and the camera will travel along the configured line.
Border Scan
A scan between preset left and right positions is possible.
a. Using the direction buttons on the PTZ Control interface screen move the camera to the
desired left boundary point. Click the SET button on the PTZ Control interface screen.
b. Using the screen below as an example, click the BORDER button and use the mouse and
soft keyboard to input the pattern value.