User manual

v2.0 11/8/11
34
i. Using the left mouse button and soft keyboard enter the desired tour number to be called.
j. Click the TOUR button and the camera will travel along the tour line’s preset points.
Pattern
A PTZ camera can be controlled to repeatedly scan tour lines.
a. Click the SET button on the PTZ Control interface screen.
b. Using the screen below as an example, click the PATTERN button and use the mouse
and soft keyboard to input the pattern value.
c. Click BEGIN. Doing so will return to the PTZ Control interface screen where zoom, focus,
iris, direction, etc. adjustments can be made.
d. Click SET on the PTZ Control interface screen.
e. Click END.