User manual

v2.0 11/8/11
31
PTZ Camera Control
To access the PTZ control functions click the right mouse button to display the pop-up
Short-cut Menu and select PTZ CONTROL or press the PTZ button on the DVR’s front panel.
Upon doing so a PTZ Control interface similar to the one below will appear.
a. SPEED – Using the left mouse button and soft keyboard enter a value from 1 to 8 for
camera pan speed with 1 being the slowest and 8 the fastest.
b. ZOOM – Click the
button to zoom in, the button to zoom out.
c. FOCUS – Click the and buttons to adjust the camera focus. Note: Not all
cameras support remote focus adjustment.
d. IRIS – Click the and buttons to adjust the camera’s iris. Note: Not all cameras
support remote iris adjustment.
e. DIRECTION CONTROL – Control the camera’s pan and tilt by clicking on any one of the 8
direction arrows.
f. PAGE SWITCH – Clicking this button presents consecutive pages for setting up PTZ
camera presets, scans, tours, etc.
g. SET – Provides access to a screen for creating presets used in PTZ camera tours,
patterns and border scan.
h. PTZ TRACE – Clicking this buttion displays a full channel for the PTZ camera. Position
the mouse cursor on the screen, hold down the left mouse button and drag the mouse in
the direction the camera is to follow.
i. Note that camera pan and tilt are also possible using the UP/DOWN/LEFT/RIGHT control
keys on the DVR’s front panel or the remote control.
Setting Presets
To set a location for the preset:
a. Use the direction controls on the PTZ Control interface to turn the camera to the desired
preset location.