User manual

15
4.2.6 Other

PARK MODE: There are 13 actions of NONE,
Pattern 1, Tour 1, 360 scan, AB scan, Preset 1-8
selectable.

PARK TIME: The dome camera runs home
position after a period of idle time which is home time
and whose range is 1-60 mins.

POWER ON ACT: There are 14 actions of Memory,
Pattern 1, Tour 1, 360 scan, AB scan, Preset 1-8,
NONE selectable.

RATIO SPEED: Ratio speed can be set as ON or
OFF status.

AUTO FLIP: The dome camera operated flips
horizontally 180° when beyond the maximum angle. If
continuing withholding the joystick when beyond the
maximum angle in tilt, it flips horizontally 180°and 0°in
tilt. So vertical 180°whole continuous monitoring
comes true.
4.2.7 Alarm

ALARM IN: Alarm input has OFF and ON selectable.

ALARM OUT: Alarm output has NC an NO
selectable.

DWELL TIME: Its range is 05-10S.

ALARM 1: No action and preset 1-16 are selectable.

ALARM 2: No action and preset 1-16 are selectable.

ALARM 3: No action and preset 1-16 are selectable.

ALARM 4: No action and preset 1-16 are selectable.
Note:
If there are several alarm inputs at the same time, the
system will respond to the alarm inputs in turn according to the
dwell time.
<DOME>
<PRESET>
<SCAN>
<GUARD TOUR>
<PATTERN>
<PRIVACY ZONE>
<OTHER>
<ALARM >
EXIT
<OTHER>
PARK MODE NONE
PARK TIME 05
POWER ON ACT MEMORY
RATIO SPEED ON
AUTO FLIP ON
EXIT
<DOME>
<PRESET>
<SCAN>
<GUARD TOUR>
<PATTERN>
<PRIVACY ZONE>
<OTHER>
<ALARM >
EXIT
<ALARM>
ALARM IN OFF
ALARM OUT NC
PATROL TIME 05S
ALARM 1 PRESET-01
ALARM 2 PRESET-02
ALARM 3 PRESET-03
ALARM 4 PRESET-04
EXIT