User manual

13
back.
Because some presets are used to realize special
functions, they can not be set and called normally.
4.2.2 Scan

SCAN SPEED: Scan speed includes setting the
speed of limited points scan (A-B scan) and
360°scan. Its range is 1-9 grades.
Note:
The effective range of left and right boundary is 20-340°.
4.2.3 Guard Tour
This dome camera can set 4 groups of guard tour. Each group has 16 points and each point
can be set alone the dwell time and tour speed.

GUARD TOUR NO: It has 1-4 groups settable.

CALL GUARD TOUR: Call the guard tour ID edited
successfully.
<GUARD TOUR>

ID: The tour sequence of guard tour group. Its range
is 1-16.

POINT: The preset of guard tour. Its range is 01-64
settable.

TIME: The default time of all points is 05s. Its range
is 05-60s.

SPEED: The speed between two points in each
guard tour group can be set alone. Its range is 1-64
grades.
Note:
Preset 33 and 34 can’t be set as guard tour point.
SCAN
SCAN SPEED 5
EXIT
<GUARD TOUR>
GUARD TOUR NO 1
CALL GUARD TOUR
<GUARD TOUR >
EXIT
<GUARD TOUR>
ID POINT TIME SPEED
01 01 05 64
02 02 05 64
03 03 05 64
04 04 05 64
05 05 05 64
06 06 05 64
07 07 05 64
08 08 05 64
<NEXT PAGE>
<GUARD TOUR>
ID POINT TIME SPEED
09 09 05 64
10 10 05 64
11 11 05 64
12 12 05 64
13 13 05 64
14 14 05 64
15 15 05 64
16 16 05 64
SAVE
<PRESET>
PRESET NO 001
CALL PRESET
<SET PRESET>
PRESET 1: SAVE
PRESET 2: BACK