User manual

12
4.1 System

<SYSTEM>

PROTOCOL: Display the protocol of the dome.

COMM: 2400. N. 8. 1 means the communication
information. 2400 is baud rate. COMM form: Baud rate.
Check bit. Data bit. Start bit.

DOME ID: Display the dome address. The range is
000-255.

MODULE: Display the brand and model of camera.

VERSION: Version will be updated along with the
product upgrading.

<COMM SET>

DEVICE ID: It is only and used to distinct from the
ID of other domes.

CHECK ID: Distinguishing several domes with same
ID and altering target ID, soft protocol and baud rate
need to enter check ID in line with the device ID,
otherwise altering can’t be completed.

TARGET ID: Target ID can be changed and edited
on line. It will be effective immediately after changed.
“Dial the address number” on this mini dome is not
available.

BAUD RATE: Baud rate is selectable. 1200, 2400,
4800, 9600 are available. Default is 2400.
4.2 Dome Function
4.2.1 Preset

PRESET NO: Select the preset number needing
to be operated, whose range is
001-220.

CALL PRESET: Call the preset number edited.

<SET PRESET>
Entering SET PRESET displays the content as left
figure. Call preset 1 to save and call preset 2 to
<MAIN MENU>
<SYSTEM>
<DOME>
<CAMERA>
<IR>
<DISPLAY>
<TIME>
<LANGUAGE>
<RESET>
EXIT
<SYSTEM>
PROTOCOL PELCO-D/P
COMM 2400.N.8.1
DOME ID 001
MODULE
VERSION
< COMM SET>
EXIT
<PRESET>
PRESET NO 001
CALL PRESET
<SET PRESET>
EXIT
<COMM SET>
DEVICE ID
CHECK ID
TARGET ID 001
BAUD RATE 2400
SAVE
EXIT