User manual

9
Press ZOOM- button to make the lens farther and minify the scene.
Press ZOOM+ button to make the lens closer and magnify the scene.
Focus
After FOCUS- button is pressed, the object in vicinity will become clearer while the object far
away will become ambiguous.
After FOCUS+ button is pressed, the object far away will become clearer while the object in
vicinity will be ambiguous.
Iris
Press IRIS- to gradually shrink the iris and decrease the image brightness.
Press IRIS+ to enlarge the iris and increase the image brightness.
Preset Point
Setting preset, press button “preset” + ”number” + ”enter”.
Calling preset, press button “call” + ”number” + ”enter”.
Deleting preset, press button “clear” + ”number” + ”enter”.
Remark:
Some preset points are used tentatively for special functions.
3.3 Special Function
The follow presets are predefined as special function, please shot+ preset No.+ enter to enable
those functions:
Note
: If use some other equipments to control IR dome, some special functions probably can’t
be effective because of the limit of protocol.
PREST
FUNCTION
PRESET
FUNCTION
33
Pan scan180 º
86
BLC on
34
Reset
87
BLC off
75
Trace memory 1
88
Freeze on
76
Trace memory 2
89
Freeze off
77
Trace memory 3
91
Limited Points Scan (A-B scan)
78
Trace memory 4
92
Set left point of A-B scan
79
Digital zoom on
93
Set right point of A-B scan
80
Digital zoom off
94
OSD menu off
81
Auto day/night
95
OSD menu on
82
Switch to night
96
Guard tour 3
83
Switch to day
97
Guard tour 2
84
Force on far light
98
Guard tour 1
85
Force on near light
99
Pan scan