User manual

8
3. Instruction
3.1 Power On Action
When initializing the system, the operation as left figure will run
in 2 seconds.
When restoring out-of-factory settings, please wait patiently.
The operation as left figure will run in 1 minute.
This left figure means initializing the pan/tilt motor of speed
dome camera.
The initialization of pan/tilt motor completes. It is initializing the
camera and detecting the module of camera.
.
XXX is the specific model of camera module which is
displayed after camera finishes detection.
Power on self testing completes.
3.2 Basic Function
Dome Running
Control joystick or up, down, left and right key in the keyboard.
Zoom
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM 2400.N.8.1
DOME ID 001
MODULE
VERSION V1.2
PAN INIT
TILT INIT
POWER ON
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM 2400.N.8.1
DOME ID 001
MODULE
VERSION V1.2
PAN OVER
TILT OVER
POWER ON
IR SPEED DOME
PROTOCOL PELCO-D/P
COMM 2400.N.8.1
DOME ID 001
MODULE XXX
VERSION V1.2
PAN OVER
TILT OVER
POWER ON