Use and Care Manual

CALIBRATION MODE

Remove the power plug from the TEMPAL

. PRESS and HOLD the MENU

button and re-connect power. Release MENU. A ‘SET TMP’ will appear on

screen. Press the [+] or [–] buttons to select the desired temperature level. To

save the calibration and return to normal mode, cycle power by removing the

power plug and re-inserting it. The unit is now calibrated to the new levels.

REMOVE CALIBRATION SETTINGS

Remove the power plug from the TEMPAL

. PRESS and HOLD the [-] button and re-connect power. Release

the [–] button. Previous calibration settings are now erased from memory.

TEMPAL

Suggested Uses:

• Monitor refrigerated rooms for temperature fluctuations or power loss

• Track and send alerts for loss of heat in vacation homes

• Monitor temperature in sensitive areas such as archival storage facilities

• Monitor farm incubators and nurseries

• Connect to an equipped DVR to view display worldwide over a mobile device or PC. Receive email or

text alerts when TEMPAL

alarms. An internet /email capable DVR is required for remote monitoring

and alerts.

Questions? Contact Security Labs Technical Support at 1-800-774-0284