Use and Care Manual

SETTING UP THE TEMPAL
TM
Tap the MENU button to view programming screens. NOTE: If you leave the menu system on, after 30
seconds it will automatically return to the temperature display screen (Screen 5). The menu system will not
time out if the TEMPAL
TM
is in calibration mode.
Screen 1 - High Temp Value
[+] = increment value
[-] = decrement value
Press/Hold [-] and tap [+] to enable/disable this alarm trigger
Screen 2 - Low Temp Value
[+] = increment value
[-] = decrement value
Press/Hold [-] and tap [+] to enable/disable this alarm trigger
Screen 3 - Temperature Display Mode (deg F/deg C)
[+] = toggle value
[-] = not used
Screen 4 - Alarm Output Type (NO/NC)
[+] = toggle value
[-] = not used
An alarm condition will activate based on settings programmed in
screens 1 & 2. Values outside the range will activate alarm. The
‘ALARM’ LED on panel will turn RED during an temperature alarm
condition.