Use and Care Manual

9. The Camera Login page will pop up. Enter your account and password on

the login page. By default, the administrator's username is: admin, leave the

password box blank

Click the 'Sign in' button as shown below:

Note: If you are using a PC, follow the top link for IE Browsers. This will

activate ActiveX which allows access to additional functions of the user

interface. If you are a Mac or Firefox user, you can view the camera via the

second link, Server Push Mode. Server Push Mode offers a few less controls

than ActiveX mode, but has proven to be more stable on some PCs.

WiFi ACTIVATION

Please complete the basic camera setup procedure before activating the WiFi

feature. It is important for the camera to first have an IP Address and Subnet

that are compatible with your wireless network.

1. With the LAN cable still attached to your camera, connect to it using the

IP Camera Tool, or by entering the local IP address into your web browser

address bar.

2. Login with your user name and password (Default is User name = admin,

Password (leave empty). Click <OK> or press <ENTER>.

3. Click on a “Sign in” button depending on the default browser that is being

opened.