Use and Care Manual

Receiver – Enter up to four receiver e-mail address

SMTP Server - The SMTP server for the sender mailbox.

Need Authentication - Check the box if the email needs authentication then

input the SMTP User Name & Password.

Mail test: Set the Mail parameters then click 'Submit' first before sending a

test email. “Success” will be the response on your screen if the e-mail

parameters have been entered correctly.

Report Internet IP by Mail – Sends an e-mail when the camera is powered

up or the IP address is changed.

FTP Service Settings

Note: When Alarm Service Settings > Upload Image on Alarm is checked, the

FTP Service takes effect.

FTP Server - The FTP server address.

FTP port - The port usually is 21.

FTP Mode - Supports standard (POST) mode and passive (PASV) mode.

Upload Image Now - Check the box to upload the image. When checked, you

can input the upload interval time in seconds.

FTP Test - Set the FTP parameters and then click 'Submit' before testing the

FTP settings. If successful, it will display the prompt “Success”.