Use and Care Manual

12
number from the drop list, and click on “Go”.
Resolution
Select either VGA (640x480) for a better picture, or QVGA (320x240) for faster
transmission or less storage space required for recordings..
Mode
Select either 50Hz, 60Hz (USA indoors), or Outdoor to properly sync your
camera to the lighting of the camera’s view.
Brightness and Contrast parameters
Click the + or - icons to adjust the brightness and contrast of the camera
image.
Default All
Click to return the settings to the factory defaults.
For Administrator
When you login as an Administrator, the 'For Administrator' functions are
enabled.
Device Info - You can find information about the camera such as the Device
ID, Firmware Version and Embeded Web UI (User Interface) Version.
Note: Always click “Submit” at the bottom of any settings page to
upload and store your changes to the camera.
Alias Settings - You can change the name of your IP camera.
Data & Time Settings - Set the time and date. If your camera is connected
to the internet, checking the “Sync with NTP Server” box, and selecting
“time.nist.gov” is suggested for the best accuracy and synchronization with
other cameras you may own.