Use and Care Manual

52
there is recorded video for an event, an arrow icon will be shown to the left side of the
time/date information. Rest your cursor on the line and press “enter”, or left click your
mouse to playback the recorded event. The arrow icon is necessary since not all event
types record video such as; Remote Login, Remote Logout, HDD Full, HDD Error, or if the
hard drive has been recently formatted (initialized) and the event logs were not cleared
using the Reset System Events command in the Utility Menu.
Item Description
Criteria
Set up conditions for the event search function - Section 4.1.1.1
Page
If more than one page of events is available for review, a drag bar will appear
at the top of the screen. You may use the drag bar, click on the page
arrows, or enter a page number directly in the number box.
Date/Time
Date/ time when the event occurred.
Event Type
Event types available for searches:
Motion
: Motion detected
Sensor
: Alarm sensor trigger
Video Loss
: Video loss from camera
Remote Login
: User log-in over a network
Remote Logout
: User log-out over a network
Power On
: System power up noted
HDD Full
: Hard drive is FULL
HDD Error
: Hard drive error detected
Reboot
: System Reboot noted
Channel
The channel where the event occurred.