Use and Care Manual

3.11 Diagnostic

The diagnostic screen is a great way to see a snapshot of your DVR’s IP and hard drive

status.

Item Description

Version

Shows the current firmware version of DVR

IP Address

Shows the connected IP address of the DVR. If disconnected from

network, the screen will display” NETWORK DISCONNECT”.

MAC Address

MAC Address of DVR. A hardware ID number that never changes.

HDD Volume

The total capacity of each hard drive in your unit.

Used

Displays the percentage of space currently used on the hard drive(s)

HDD Status

Shows three status indicators; USING (currently in use), GOOD (available

for use), BAD (not currently compatible for storage, please try the <HDD

Initialization> command , Utility Menu, before replacing the drive).

Format Time

Displays the last date the drive was formatted using the <HDD

Initialization> command.

NOTE

！

DO NOT TURN OFF THE POWER OR UNPLUG THE USB DEVICE DURING THE

UPGRADE as it may cause damage to the DVR.