Use and Care Manual

detection, and sensor / alarm detection. Busy or high traffic times may be best suited for

Normal (continuous) recording, while off peak hours may be better monitored with motion

detection or alarm recording. Up to 50 schedules can be set (10 per page / 5 pages)

using the left side of the menu above. The right side shows a summary of all schedules

by clicking on the Normal, Motion, or Sensor boxes along the top. Holding your mouse

pointer over each completed schedule box on the left will also show its settings

summarized on the right side of this menu. Clicking on a schedule box on the left side will

bring up the Enable menu below.

Item Description

Page

Click or press ▼ to select up to 5 pages. Each page provides 10

schedule boxes (50 schedules total).

Holiday Setup Up to 50 Holidays can be scheduled. Each Holiday will repeat the

settings you enter for “Holiday” below.

Normal/Motion/Sensor Shows the summary of settings for each item

3.4.1 Schedule Enable Setup

Create up to 50 schedule combinations using the screen above. Virtually all combinations

ever needed are possible.

Item Description

Enable

Select one, two, or all three record types

Start / End Time

Enter the time range you wish to operate the selected

record type. Continuous (24/7) is shown above.

Days

Select the days of the week you wish to run the

selections made above. Holiday will always be

checked by itself (no other days checked).