Use and Care Manual

Change values in selected item

ESC

Press to cancel or exit setup

ENTER

Activates the selected menu

3.2 Record Setup

Item Description

HDD FULL

Select STOP to stop recording when the hard drive(s) are full, or OVERWRITE to

enable continuous recording.

[Stop]

：

Stop Recording when HDD(s) is full

[Overwrite]

：

Start to overwrite beginning with the oldest data on the HDD, and

continue to record.

OSD Position

Setup

A time/date stamp is added to the video for each channel being recorded. The

position of the stamp can be adjusted for each channel

individually to avoid

blocking any important items. Selecting a channel number on this screen, and then

OSD Position Setup, allows you to preview where the time/date stamp will be

recorded.

OSD Position X

Sets the Horizontal placement from 0 to 456, use the arrows on the box or left click

on the center of the box to activate a numeric keypad.

OSD Position Y

Sets the Vertical placement from 0 to 456, use the arrows on the box or left click on

the center of the box to activate a numeric keypad.