Use and Care Manual

9
Specific Preset Commands
Preset numbers from 31 to 58 are defined as specific commands and not used as single presets.
Please refer to the following table for details of these presets and commands.
Preset
Trigger
Mode
Function
31~38
Setting enter into the tour group setting
Call start the tour group
40 Call
tour group setting or pan scanning with low
speed
41 Call
tour group setting or pan scanning with middle
speed
42 Call
tour group setting or pan scanning with high
speed
43 Call
the stay time is 3 seconds for scanning tour
group setting
44 Call
the stay time is 5 seconds for scanning tour
group setting
45 Call
the stay time is 7 seconds for scanning tour
group setting
46 Call enter/escape camera menu
47 Call screen characters On/Off
48 Call color/B-W switchable
49 Call
pan/tilt speed change along with zoom
change
50 Call
pan/tilt speed change not along with zoom
change
51 Call display camera model
52 Call not display camera model
53 Call display zoom change icon
54 Call not display zoom change icon
16