Owner`s manual

or <4> to instantly move the PTZ camera to the previously programmed position.

Programmed positions can also be set and called with the Network Viewer program on the

included software CD.

Main Menu – System Set – F/W Upgrade

Should a firmware upgrade become available for your DVR, you can install it via the USB

(flash drive) port on the front of your unit. Transfer the available upgrade file (.FWI) that you

have received via e-mail or from downloading from our web site onto a USB flash drive.

Place your unit in the <STOP> mode, connect the USB flash drive, and follow the prompts on

the F/W Upgrade Menu.

Press PLAY to start version update.

DVR automatically reboots after version is updated.